Popular Design for Vacuum pump for glass lamination - High transparent EVA – Xiaoshi
Popular Design for Vacuum pump for glass lamination - High transparent EVA – Xiaoshi Detail:
Product Description
Laminated glass EVA film is placed between two layers of glass, a continuous vacuum is requested to pump out air when heated up to soften the film and laminate 2 pcs of glass into safety glass.
High transparent EVA film can be used for both indoor and outdoor transparent glass lamination and also insert materials lamination. It has lower lamination temperature which are suitable for match with different types of inserts( Fabric, PET film, PVC film and other types of inserts).
Product description and advantages
The EVA film has many features that make it an excellent material for creating laminates. Due to the good characters of EVA film in adhesion, durability,moisture resistance, it was more and more widely used in current components and a variety of optical products. such as construction wall,cover grid,shower room, show case, bank counter,Anti-smash glass and so on.
The most important properties of the film include:
High transparency and durability
Protection against impact
Humidity resistance
Good adhesion to glass & variety kinds of inserts
Low water absorption rate
Storage condition:
It is usually stored in a ventilated, dry and clean warehouse, avoiding direct sunlight and radiation of heat, preventing moisture and heavy pressure. The temperature of the warehouse should ≤ 35℃, and the humidity ≤55%. It should not be placed directly on the ground, supported by wooden boards or other things to facilitate ventilation, heat dissipation and moisture isolation. If the film is pressurized, heated, and exposed to excessive moisture, it will cause different degrees of self-adhesion. If the surface humidity of the film is too high, it will also affect the bonding strength of the film and glass and other glass interlayer materials, affecting normal use. The film should be used as soon as possible after opening. If it is not applicable temporarily, the film should be sealed and packaged.
Technical Data of High clear EVA film
Item | Data |
Melting Point | 68 ℃ |
Density | 0.985 g/CM3 |
Water Absorption | ≦ 0.1 % |
Light Transmittance | > 85% |
Haze | <0.2% |
Tensile Strength | 21 Mpa |
Elongation at Break | 542% |
Cross Linking | 85% |
UV Resistance(290-385nm) | 89.20% |
Yellow Index(YI) | < 3.0 |
UV Resistance(290-385nm) | 89.20% |
Dumping & Heat Resistance (85 ℃, 85% RH) | 88.60% |
Boiling Test (2 hrs into 100℃water) | Qualified |
Product Name | Specification(Customized width available) | |
High Clear EVA film | 0.25mm, 0.38mm | Max 2400mm |
Ultra Clear EVA film | 0.38mm, 0.50mm, 0.76mm, 1.52mm | Max 2600mm |
White EVA film | 0.38mm * 2000mm/2400mm *100m | |
Color EVA film | 0.38mm * 2000mm/2400mm *100m |
Product detail pictures:
Related Product Guide:
Our commission would be to serve our customers and clientele with very best excellent and aggressive portable digital products for Popular Design for Vacuum pump for glass lamination - High transparent EVA – Xiaoshi , The product will supply to all over the world, such as: Bulgaria, Bahamas, Houston, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We have tightened inspection for quality of product.
By Helen from Bahamas - 2017.12.02 14:11
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By April from Spain - 2018.11.11 19:52