OEM manufacturer Laminated Glass Interlayer Types - High transparent EVA – Xiaoshi
OEM manufacturer Laminated Glass Interlayer Types - High transparent EVA – Xiaoshi Detail:
Product Description
Laminated glass EVA film is placed between two layers of glass, a continuous vacuum is requested to pump out air when heated up to soften the film and laminate 2 pcs of glass into safety glass.
High transparent EVA film can be used for both indoor and outdoor transparent glass lamination and also insert materials lamination. It has lower lamination temperature which are suitable for match with different types of inserts( Fabric, PET film, PVC film and other types of inserts).
Product description and advantages
The EVA film has many features that make it an excellent material for creating laminates. Due to the good characters of EVA film in adhesion, durability,moisture resistance, it was more and more widely used in current components and a variety of optical products. such as construction wall,cover grid,shower room, show case, bank counter,Anti-smash glass and so on.
The most important properties of the film include:
High transparency and durability
Protection against impact
Humidity resistance
Good adhesion to glass & variety kinds of inserts
Low water absorption rate
Storage condition:
It is usually stored in a ventilated, dry and clean warehouse, avoiding direct sunlight and radiation of heat, preventing moisture and heavy pressure. The temperature of the warehouse should ≤ 35℃, and the humidity ≤55%. It should not be placed directly on the ground, supported by wooden boards or other things to facilitate ventilation, heat dissipation and moisture isolation. If the film is pressurized, heated, and exposed to excessive moisture, it will cause different degrees of self-adhesion. If the surface humidity of the film is too high, it will also affect the bonding strength of the film and glass and other glass interlayer materials, affecting normal use. The film should be used as soon as possible after opening. If it is not applicable temporarily, the film should be sealed and packaged.
Technical Data of High clear EVA film
| Item | Data |
| Melting Point | 68 ℃ |
| Density | 0.985 g/CM3 |
| Water Absorption | ≦ 0.1 % |
| Light Transmittance | > 85% |
| Haze | <0.2% |
| Tensile Strength | 21 Mpa |
| Elongation at Break | 542% |
| Cross Linking | 85% |
| UV Resistance(290-385nm) | 89.20% |
| Yellow Index(YI) | < 3.0 |
| UV Resistance(290-385nm) | 89.20% |
| Dumping & Heat Resistance (85 ℃， 85% RH） | 88.60% |
| Boiling Test (2 hrs into 100℃water) | Qualified |
| Product Name | Specification(Customized width available) | |
| High Clear EVA film | 0.25mm, 0.38mm | Max 2400mm |
| Ultra Clear EVA film | 0.38mm, 0.50mm, 0.76mm, 1.52mm | Max 2600mm |
| White EVA film | 0.38mm * 2000mm/2400mm *100m | |
| Color EVA film | 0.38mm * 2000mm/2400mm *100m | |
Product detail pictures:
Related Product Guide:
The purchaser fulfillment is our primary focus on. We uphold a consistent level of professionalism, high quality, credibility and service for OEM manufacturer Laminated Glass Interlayer Types - High transparent EVA – Xiaoshi , The product will supply to all over the world, such as: Ottawa, Iran, Ghana, Welcome to visit our company and factory, there are various products displayed in our showroom that will meet your expectation, meanwhile, if you are convenient to visit our website, our sales staff will try their efforts to provide you the best service
By Heloise from Nepal - 2018.11.11 19:52
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Martina from Serbia - 2017.03.28 12:22
