Newly Arrival Glass lamination process - White EVA film – Xiaoshi
Newly Arrival Glass lamination process - White EVA film – Xiaoshi Detail:
Laminated glass EVA film is placed between two layers of glass, a continuous vacuum is requested to pump out air when heated up to soften the film and laminate 2 pcs of glass into safety glass.
There are different types of white EVA film for safety glass lamination.
White opaque, Super white, Frosted white, Milky white and Jade white.
White color EVA film can be used for both indoor and outdoor glass lamination and also insert materials lamination. It has lower lamination temperature which are suitable for match with different types of inserts( Fabric, PET film, PVC film and other types of inserts).
Product description and advantages
Due to the good characters of EVA film in adhesion, durability,moisture resistance, it was more and more widely used in current components and a variety of optical products. such as partition wall and shower room.
The most important properties of the film include:
High durability
Protection against impact
Humidity resistance
Good adhesion to glass & variety kinds of inserts
Low water absorption rate
Storage condition:
It is usually stored in a ventilated, dry and clean warehouse, avoiding direct sunlight and radiation of heat, preventing moisture and heavy pressure. The temperature of the warehouse should ≤ 35℃, and the humidity ≤55%. It should not be placed directly on the ground, supported by wooden boards or other things to facilitate ventilation, heat dissipation and moisture isolation. If the film is pressurized, heated, and exposed to excessive moisture, it will cause different degrees of self-adhesion. If the surface humidity of the film is too high, it will also affect the bonding strength of the film and glass and other glass interlayer materials, affecting normal use. The film should be used as soon as possible after opening. If it is not applicable temporarily, the film should be sealed and packaged.
Product Specifications
| Product | Specifications ( Thickness) | |
| High Clear EVA film | 0.25mm, 0.38mm | Max 2400mm |
| Ultra Clear EVA film | 0.25mm, 0.38mm, 0.50mm, 0.76mm, 1.52mm | Max 2600mm |
| White EVA film | 0.38mm * 2000mm/2400mm *100m | |
| Color EVA film | 0.38mm * 2000mm/2400mm *100m | |
Technical Data
| Product | TW-2 | TW-1 | TR-2 | TR-1 | OP-1 | OP-2 |
| Transmittance % | 46 | 28 | 12 | 5 | 0.8 | 0.3 |
| Shodow Block % | 53 | 78 | 86 | 92 | 96 | 98 |
Product detail pictures:
Related Product Guide:
No matter new customer or old customer, We believe in long term and trusted relationship for Newly Arrival Glass lamination process - White EVA film – Xiaoshi , The product will supply to all over the world, such as: Palestine, Algeria, Kuwait, We put the product quality and customer's benefits to the first place. Our experienced salesmen supply prompt and efficient service. Quality control group make sure the best quality. We believe quality comes from detail. If you have demand, allow us to work together to get success.
By Alexandra from Jeddah - 2017.10.27 12:12
We have been looking for a professional and responsible supplier, and now we find it.
By David from Montpellier - 2018.06.03 10:17
