Hot Selling for Glass and glazing lamination - Ionoplast interlayer film – Xiaoshi

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

With dependable high quality approach, great reputation and excellent customer support, the series of products and solutions produced by our firm are exported to lots of countries and regions for Smart Glass Film, Smart Privacy Film, Eva Film For Glass Lamiantion, We are expecting to cooperate with you on the basis of mutual benefits and common development. We will never disappoint you.

Hot Selling for Glass and glazing lamination - Ionoplast interlayer film – Xiaoshi Detail:

Ionoplast interlayr film technology breaks the foreign monopoly of high strength ionoplast interlayer material for laminated safety glass, and promoting the development of the whole laminated glass industry.

It is made of ethylene and methacrylate ion copolymer, containing about 1% metallic sodium ion. Five times stronger and up to 100 times stiffer than conventional laminating materials. With this kind of strength the glass can be a more active structural element in the constructions, opening up design possibilities that didn’t exist before. Besides its strength, the ionoplast interlayer retains excellent optical and visual performance even after years of outdoor exposure. Ionoplast interlayer film is much less vulnerable to moisture exposure or yellowing over time. It is the research achievements to meet the growing market demand for security, safety, durability, aesthetics, edge stability and other aspects of laminated glass, especially in the application like hurricane glazing, glass bridge, facades, overhead glazing ,etc.

Features
• Stiffness: 100 times stiffer of conventional interlayer materials
• Tearing strength: 5 times stronger of conventional interlayer materials
• Excellent optical and visual performance
• Yellowish index(YI): <1.5
• Outstanding durability after UV radiation
• High edge stability, Good compatibility with silicon.
Product advantages
1. Tearing strength : 5 times stronger than conventional interlayer material .
2. Stiffness: 100 times stiffer than conventional interlayer material.
3. The load-bearing of laminated glass made from Ionoplast interlayer film is twice stronger than made from PVB interlayer at same thickness combination.
4. The deflection of laminated glass made fromIonoplast interlayer film is only 1/4 of laminated glass made from PVB under the same thickness and load.
5. The stress and deflection of laminated glass made from Ionoplast interlayer film are essentially same as monolithic glass at same thickness, while the laminated glass made from PVB are much greater.
6. Reduction of glass thickness, and the glass weight could be reduced by 40%.
7. Suitable for open edge development and design.
8. Reduction the number of fixing points for frameless glazing , make design more innovative and diversification .
Storage conditions
Ionoplast interlayer film should be stored at room temperature with original sealing vacuum moistureproof packing. It is recommended use material within 24months from the date of production to avoid the decline of adhesion. Please properly seal and pack unused materials and store them in cool place to prevent the material from being exposed to the environment and absorbing moisture, which may resulting in adhesion reduced.Control the moisture of material not over 0.2%, Otherwise the adhesion may go down and have bubbles during laminating. It is also recommended that testing the moisture content and the adhesion property of Ionoplast interlayer film before production if it has been stored for a long time from the production date. If the moisture content exceeds 0.2%, it is not recommended to use.

Technical Data

	Item	Test Method	Safeglas ™ MG
Physicial	Roll Length		50-100 m
	Max.Width		2400 mm
	Thickness	Micrometer	0.76-1.52 mm
	Specific Gravity	ASTM792	0.93-0.98 g/cm3
	Hardness(1.52mm)	ASTMD2240	65 Shore D
Mechanical	Elongation at Break	ASTMD683	≧ 300%
	Young modulus	ASTMD683	>300 Mpa
	Shear modulus	ASTMD683	42.7 N/mm2
	Bending modulus	ASTMD683	345 Mpa(23 ℃)
	Shear strength	ASTMD683	50 MJ/m2
	Tensile strength	ASTMD683	≧ 30 Mpa
Thermal	Coeffcient of thermal expansion	ASTMD831	10-15*103cm/cm ℃
	Thermal deflection temperature	ASTMD831	40 ℃
	Melt point	ASTMD831	94 ℃
	Flash point	ADTMD1929	470 ℃
Optical	YI	JC/T2166-2013	<15%
	Refractive Index	JC/T2166-2013	1.5%(20 ℃)
	Light Transmittance	JC/T2166-2013	90.2 % (0.76mm)
	Haza	JC/T2166-2013	<0.5 % (0.76mm)
	UV filtering	JC/T2166-2013	>99 % (380nm)

Product Specifications

Thickness (mm)	Max.Width (mm)	Length(m)	Packing
0.76/0.89/1.14	2400	100	Inside: Tinfoil vacuum Outside: Plywood case
1.35
1.52		50
Application: Facades, Hurrican Glazing, Sunroom Glazing, Jumbo Glass, etc.

Product detail pictures:

Related Product Guide:

Using a total scientific good quality management process, superior high quality and excellent faith, we get great name and occupied this field for Hot Selling for Glass and glazing lamination - Ionoplast interlayer film – Xiaoshi , The product will supply to all over the world, such as: Atlanta, Chile, Croatia, With a fully integrated operation system, our company has won a good fame for our high quality goods, reasonable prices and good services. Meanwhile, we have established a strict quality management system conducted in material incoming, processing and delivery. Abiding by the principle of Credit first and customer supremacy, we sincerely welcome clients from home and abroad to cooperate with us and advance together to create a brilliant future.

Accessories for glass lamination

Eva Film For Glass Lamination

Glass grinding wheel

Glass lamination

Glass polishing tool

Insulating glass material

Interlayer Film For Laminated Glass

Laminated Glass With Decorative Interlayer

Tempered glass lamination

Vacuum pump for glass lamination

This company has the idea of better quality, lower processing costs, prices are more reasonable, so they have competitive product quality and price, that's the main reason we chose to cooperate.